Epson 660 - Manual (Page 3)

Quick Start
Scanning with the Scanner Buttons
Your scanner has three buttons to start working with EPSON Scan Tool; Scan, Document Copy, Photo
Copy. To use these buttons, please follow the steps below.
Note: Press the Scan button to save your scanned image as a file in a certain location in your
PC.
Press the Document Copy button to scan the black and white document.
Press the Photo Copy button to scan the Photo.
Using the Document Copy or Photo Copy Button
Pressing the Document Copy or Photo Copy button will send the scanned image to a printer. The resolution
and the image type depend on the settings of the printer.
Follow the steps below to use these buttons.
Step 1: Make sure that both of your scanner and printer are connected to the PC, and they are turned on.
Note: Connect the printer packed with your scanner to get the best printing results.
Step 2: Make sure that the printer is selected as a default printer in your Windows settings.
Step 3: Load the paper in the printer.
Note: Use plain paper for the document copy or photo paper for the photo copy to get the
best results.
Step 4: Place original on the scanner glass plate. Please refer to the illustrations below for how to place
the original you want to scan on the scanner glass plate.