Making a scan with epson scan tool – Epson 660 User Manual

Page 5

Advertising

Step 3:

Press the Scan button.

Step 4:

The scanner start scanning, then EPSON Scan Tool opens with Scan to File destination. If the Auto

preview setting is on, EPSON Scan Tool makes a preview. For information on Auto preview function,

Step 5:

After scanning EPSON Scan Tool is in standby mode.

Making a scan with EPSON Scan Tool

To start working with EPSON Scan Tool in the Console Mode, please follow the steps below.

Step 1:

Make sure that the scanner is connected to your PC, and both are turned on. If you will use the

Scan to Printer function, connect the printer to the PC and turn it on.

Note: Connect the printer packed with your scanner to get the best printing results.

Step 2:

Select the printer connected to the PC as a default printer in your Windows settings, and load the

paper in the printer, if necessary.

Step 3:

Place original on scanner glass plate. Please refer to the illustrations below for how to place the

original you want to scan on the scanner glass plate.

Scanning reflective originals

Place the original with the side to be scanned facing

down on the scanner glass plate. Note the direction

of the original so that you will not scan the image in

the wrong direction.

Note the direction

Advertising