Unpacking, setting up and inserting the battery, 7 handling batteries, 8 material damage – Silvercrest SHT 2000 A1 User Manual

Page 61: 1 setting up the appliance

Advertising
background image

SHT 2000 A1

59

Ingested batteries can be highly
dangerous. Obtain medical assistance
immediately if the battery is swallowed.

• Ensure that the packing foil does not

become a deadly trap for a child.
Packing foils are not toys.

4.7 Handling batteries

Warning!
To prevent a risk of explosion,
normal batteries must not be
charged, heated or disposed of by
burning.

• Never try to open the battery.

To prevent injury, if battery acid has
leaked avoid contact with skin, eyes and
mucous membranes. In the event of

contact with the acid, rinse the affected
areas immediately with plenty of clean
water and contact a doctor at once.

Caution! To avoid damaging the product
and ensure it functions correctly, please
note:
• Use only type AAA batteries.

4.8 Material damage

Caution! To avoid material damage,
please observe the following requirements.
• Never try to revolve the appliance

manually as this might damage the
motor.

• Remove the battery from the remote

control if you are not using it for a
prolonged period of time. A leaking
battery could damage the remote
control.

5. Unpacking, setting up and inserting the battery

5.1 Setting up the appliance

Note! As the appliance and heating coils
are supplied with a thin film of grease, there
might be a small amount of smoke and
odour the first time the appliance is used.
This is not harmful and will stop after a short
while. Ensure meanwhile that there is
sufficient ventilation.
1. Unpack the appliance from the

packaging.

2. Remove the transport packaging.
3. Check that the appliance shows no signs

of damage.

Warning! Ensure that there is
sufficient distance from the wall,
fixtures and other appliances. The
distance must be at least 1.5 m to
exclude the risk of fire.

4. Select a location that complies with the

safety information (see “4.2 General
information” on page 56).

5. Select a location where the flow of hot

air is not directly aimed at people,
animals or plants.

6. Plug the mains plug into a wall socket

that complies with the technical data.
Note: The appliance consumes up to
10 amperes of current (2,000 watts). If
you have plugged other power
consumers into the same circuit, check

RP75978 Heiztower LB1 Seite 59 Mittwoch, 29. August 2012 3:44 15

Advertising