Elo TouchSystems 1925L Series - Manual (Page 13)

2-9
Step 2-Connecting the Video Cables
• Tilt the screen up and back to access the connection ports.
• Connect the 15-pin video cable (the ferrite bead end), the 24-pin DVI-D
cable, the RCA or the S-Video cable to the video port on your PC.
• Connect the other end of the video cable to the video connector on your
touchmonitor by routing the cable through the hole in the stand.
• Secure the cable to your touchmonitor and PC by turning the screws on the
connector clockwise.
• Place the cable in the cable management clip.
Female 15-pin video connector
Connections on underside
video port
video cable
RCA S-Video