Silvercrest KH 2431 - Manual (Page 113)

110
Service and Operation
KH 2431
GB
Fast forward/backward
♦ During playback press and hold the buttons I◂◂ or ▸▸I to start a fast
forward or rewind.
Setting the playback mode
♦ Repeatedly press the button MODE to toggle between the following
settings:
– REPEAT ONE: The current title is repeated.
– REPEAT: The current directory is repeated.
– REPEAT ALL: all of the tracks to be repeated.
– RANDOM: The tracks are played in a random order.
If any of these settings are activated, this will be indicated in the display.
NOTE
► After pressing the button the setting of the playback mode is reset.
Programming the playback order
You can programme in a playback sequence for up to 99 titles.
The programming can be done only when playback is stopped.
Create a list
♦ Press the button MEMORY/PROG. . Indicated in the display are F00
(00 blinks) and P01.
♦ Select with the buttons I◂◂ or ▸▸I the desired directory and press
the button MEMORY/PROG. . Indicated in the display are T00 (00
blinks) and P01.
♦ Select with the buttons I◂◂ or ▸▸I the tracks that you want to save
on programme space 01, then press the button MEMORY/PROG. .
Indicated in the display are F00 (00 blinks) and P02.
♦ Repeat these steps until your list is complete.
♦ Press the button ▸II to complete the programming and start playback.
On the display MEMORY is indicated.
Buch_53140_LB2.indb 110 05.04.12 12:22