Epson Action Laser II User Manual
Page 217
The Multi-Media Feeder
Note: The new paper setting is effective only temporarily in the
current printer mode unless you use SelecType’s Level 1 SAVE
MACRO
setting so the paper size you use most often is
automatically selected whenever you turn on, reset, or initialize
your printer. See Chapter 5, Saving the new paper-size setting.
Depending on your application software, you may need to select the
multi-media feeder using your software, rather than with SelecType.
See Chapter 3 for information on using the printer with application
programs.
Status messages
The messages listed below may appear on the display while you are
operating the printer with the multi-media feeder. See Chapter 7 for
the steps to clear these messages.
PAPER SIZE ERROR
TRAY SET xxx
PAPER OUT
PAPER OUT xxx
RESELECT TRAY
FEED JAM
PAPER JAM
Options A-9