Epson Action Laser II - Manual (Page 44)

The Control Panel
Buttons
SelecType
Enters or exits SelecType mode. Press once to enter Level 1; keep
holding it down to enter Level 2. For a complete description of the
two SelecType levels and their various functions, see Chapter 4.
CONTINUE
RESET
COPY END
This button has several functions, so it has three names. This manual
uses the name appropriate to the operation being described.
CONTINUE-Enables the printer to resume printing automatically
after certain error or maintenance-required conditions. If the
CONTINUE light is flashing, read the corresponding status or error
message on the display and correct the problem as described in
Chapter 7, which has a complete list of status and error messages.
RESET-Cancels some settings made with SelecType or software
commands. When you hold down this button for several seconds,
RESET appears on the display panel and all settings return to their
previously-saved values. The printer finishes printing the page
already in progress at the moment this button is pressed; however,
all remaining data is discarded. If you press or , the printer
returns to its previous status without printing data.
2-4 Testing and Connecting Your Printer