Emerson Radio CKT9087 - Manual (Page 7)

6
UNPACKING AND SET-UP
• This carton contains the telephone clock radio base unit, the telephone
handset, the coiled cord that connects that handset to the base unit,
and the straight telephone line cord that connects the telephone base
unit to your telephone wall jack. Make sure that you remove all of the
components from the carton and that nothing is accidentally thrown
away with the packing materials.
Remove all the packing materials from the individual components.
• We suggest that you save the packing materials, if possible, in the
event that the unit ever needs to be returned for service. Using the
original carton and packing material is the only way to properly protect
the unit from possible shipping damage.
• Note the serial number on the bottom of your unit and write this number
in the space provided on Warranty Page of this manual.
• Place the base unit on a stable, level surface such as a table, desk,
stand, etc, out of direct sunlight, away from sources of excess heat,
dust, vibration, moisture, or humidity, and convenient to a 120V/60Hz
AC outlet and a telephone wall jack.
• Unwind the AC power cord and extend it to its full length. This is
important. The FM antenna is built into the AC power cord.
P R E PAR AT I O N F O R U S E
CKT9087_090606.p65 6/9/2006, 10:56 6