Silvercrest SUP 128 A1 - Manual (Page 21)

18 SUP 128 A1
GB
IE
Show additional information
During playback you can view additional information about the track
(track name, album name, etc.) by pressing the INFO
button.
♦ Press the INFO button again to hide the additional information.
Alphabetic track search
You can search for MP3 tracks alphabetically.
♦ Press the SEARCH button.
♦ Press ▸▸I or button or the I◂◂ or button until the desired initial
letter or number of the track appears on the display . Then the fi rst track
appears, which starts with "A", for example. If the medium does not contain
a track that starts with "A", A-NOFILE appears.
♦ Press ▸II/■ or ▸II , to start playback of the selected track.
Setting playback mode
♦ Press the RPT/INTRO/RND button or to switch between the following
settings:
– REPEAT ONE: The current track is repeated.
–
REPEAT ALL: All tracks are repeated.
– INTRO: The fi rst ten seconds of every track are played.
– RANDOM: The tracks are played in random order.
If any of these settings are activated, this will be indicated in the display.
NOTE
► If you stop playback, the playback setting will be reset.
Programming the playing order of the tracks
You can program a playback sequence for up to 10 tracks.
The programming can only take place with playback stopped.
Creating a list
♦ Press the PROG. or PROGRAM button. The display shows
PROG and P01001. P01 is the program slot number, and 001 is the selected
track number.
IB_60308_SUP128A1_LB3.indb 18 08.04.14 09:32