Silvercrest SHBS 1000 A1 - Manual (Page 14)

11 SHBS 1000 A1
GB
♦ Take the cut length add-on 7 off the appliance.
♦ If necessary, you can wash the cut length add-ons 7 under running water.
♦ Always dry the cut length add-ons 7 thoroughly afterwards.
♦ To remove the trimmer block from its holder (see Fig. D), press your thumbs
against the shaving head teeth from the front.
♦ Use the cleaning brush supplied to remove any residual hair from the trimmer
block
.
♦ Once you have completed cleaning, plug the trimmer block plug-in tab back
into the mounting opening in the shaving head holder (see Fig. E).
♦ Allow the trimmer block to engage again by pressing lightly from behind
(see Fig. F).
NOTE
► In order to reduce friction, occasionally apply a couple of drops of scissor
oil (accessory) between the blades, and then distribute it evenly. You can
also use any acid-free oil (e.g. sewing machine oil). Wipe any access oil
off with a cloth.
Disposal
Disposal of the appliance
Never dispose of the appliance in normal household waste.
This product is subject to the provisions of European Directive
2012/19/EU (Waste Electrical and Electronic Equipment).
Dispose of the appliance through an approved disposal centre or at your com-
munity waste facility. Please observe the currently applicable regulations. Please
contact your waste disposal centre should you be in any doubt.
NOTE
► Before disposing of the appliance it is essential to remove the battery fi rst.
► To do this, dismantle the appliance completely and remove the recharge-
able batteries from the PCB.
Disposal of batteries
Used batteries may not be disposed of in household waste. Every consumer is
legally obliged to dispose of batteries at a collection site of his or her community /
city district or at a retail store. The purpose of this obligation is to ensure that bat-
teries are disposed of in a non-polluting manner. Only dispose of batteries when
they are fully discharged.
IB_86722_SHBS1000A1_LB4.indb 11 IB_86722_SHBS1000A1_LB4.indb 11 18.03.13 16:49 18.03.13 16:49