2 adjusting the heating setting, 3 selecting the temperature, 4 thermal cut-out – Silvercrest SWW 1500 B2 User Manual

Page 44: 5 safety switch, 6 transporting the appliance

Advertising
background image

42

6.2 Adjusting the heating setting

The heating settings are used to select how
quickly the appliance heats up.
The appliance has three heating settings:

– Level 1: 500 watts: Press switch 5;

– Level 2: 1,000 watts: Press switch 4;

– Level 3: 1,500 watts: Press switches 4

and 5.

If you want the appliance to heat up particu-
larly quickly, select level 3. If you only want
it to heat up slowly, select level 1.
If one or both switches are switched to
"ON", the red indicators will illuminate in the
corresponding switches and the appliance
will heat up according to the corresponding
heating setting.
If both switches are set to "OFF", the appli-
ance will not produce any heat.

6.3 Selecting the temperature

Set the required temperature with the
temperature selector 6.
• When the required room temperature is

reached, slowly turn down the
temperature selector 6 until you hear a
quiet "click".
The red indicators in the switches 4 and
5 will be extinguished.
The current room temperature will be
maintained.
As soon as the appliance needs to heat
up again to maintain the temperature,
the red indicators in the switches 4 and
5 will light up once again in the
meantime.

6.4 Thermal cut-out

For your safety the appliance has a thermal
cut-out.
If the temperature inside the appliance
becomes too high, it will turn itself off automati-
cally:
1. To turn the heating off, set the

temperature selector 6 to "MIN".

2. Remove the mains plug.
3. Allow the appliance to cool down.
4. Make sure that the air can circulate

freely.
If you cannot establish a cause and the
fault occurs repeatedly, have the
appliance repaired or do not use it.

5. You can continue to operate it normally

after repair.

6.5 Safety switch

The appliance is protected against
accidental damage by a safety switch.
Should this occur, the safety switch will turn
the appliance off immediately:
• Return the appliance to an upright

position. The appliance will switch on
again automatically.

6.6 Transporting the appliance

If you wish to transport the appliance,
always carry it using the carry handle 7.

RP90993 Wärmewelle oWH LB2 Seite 42 Freitag, 9. August 2013 4:11 16

Advertising