Powerfix Digital Master-Slave Extension Lead - Manual (Page 37)

41 GB
Getting started
j The master / slave socket function can now be
used.
Using the master / slave socket function:
note: Please note that the Multiple outlet strip
has to be switched on for the function to work.
note: Please note that you first have to set the
automatic switching threshold setting in order to
use this function (see section entitled “Using the
automatic switching threshold setting”).
j Plug the electrical appliances you wish to use
into the slave sockets
1 .
j Now switch the electrical appliance that has
been plugged into the master socket
2 on
or off on the appliance itself in order to switch
the electrical appliances plugged into the slave
sockets
1 on or off, too.
Q
Using the master / slave
sockets as permanent sockets
note: You can also use the master 2 and slave
sockets 1 as permanent sockets 3 .
j Use the ON / OFF switch 5 to switch the
multiple outlet strip on.
note: When the multiple outlet strip is switched
on, the ON / OFF switch
5 will glow.
j Press the learn button 4 with a pointed object
(e.g. pencil) as long as necessary until the
LED (slave sockets on)
6 starts to flash.
j While it is flashing, press the learn button 4
with a pointed object (e.g. pencil) again for
around 3 seconds.
j Permanent mode is now on.
j You can now use the master 2 and slave
sockets 1 as permanent sockets 3 (see
section entitled “Using the permanent sockets”).
j Follow the instructions of the section entitled
“Using the automatic switching threshold” to
activate the master / slave function again.
61859_pow_Master-Slave-Steckdosenleiste_Content_ES-IT-PT-GB-DE.indd 41 20.12.10 17:49