Fixing in place / use / cleaning and care, Fixing in place, Clamping and releasing a workpiece – Powerfix Z29760B User Manual
Page 7: Cleaning and care
7
GB
Fixing in place / Use / Cleaning and care
Q
Fixing in place
1. Place the vacuum base vice down on to a suitable flat, smooth
surface.
2. Turn the suction pad lever
5
anticlockwise as far as it will go
to fix the suction pad
7
in place.
Note: If you fix the suction foot
7
in place directly at the
edge of the bench, you will be able to clamp long workpieces
vertically to work on their ends.
j
Turn the suction pad lever
5
clockwise to release the suction
pad
7
.
Q
Use
Q
Clamping and releasing a workpiece
1. Turn the vice into the desired position and fix the ball joint
6
in position with the ball joint tommy bar
8
.
2. To open the jaws
2
turn the vice jaws tommy bar
3
anticlockwise.
3. Place the workpiece between the jaws
2
and clamp it by
turning the vice jaws tommy bar
3
clockwise. Ensure that the
workpiece is tightly clamped.
j
You can now work on the workpiece.
j
After completing work on the workpiece, release it by turning
the vice jaws tommy bar
3
anticlockwise.
Q
Cleaning and care
j
Clean the product with a dry, fluff-free cloth.
j
Never use aggressive or corrosive cleaning agents, as they
may damage the product.