Powerfix Z30003 - Manual (Page 10)

10 GB/MT
Introduction / Safety instructions / Use
tap & Die Set
Q
Introduction
The instructions for use are a compo-
nent of this product. They contain im-
portant information pertaining to safety,
use and disposal. Prior to use, familiarise your-
self with all the operating and safety instructions
for this product. Only use the product as described
and for the indicated range of applications. If
passing this product on to a third party also
include all documents.
Q
Intended use
This product is intended for cutting internal and
external threads. It can cut imperial and metric
threads. Do not use the product or part of the
product as an attachment to electrical devices!
The product is intended to be used as a hand
tool only. Other types of use or product modifi-
cations are not regarded as intended and may
lead to risks such as injuries and damages. The
manufacturer is not liable for any damages caused
by any use other than its intended purpose. The
product is not intended for commercial use.
Q
Description of Parts
1 Die
2 Die stock M25
3 Tap
4 Tap wrench (adjustable)
Q
technical data
Material: Steel, plastic
Dimensions steel case: 24.8 x 15.1 x 2.2 cm
(L x W x H)
Overall weight: 990 g
Q
Included items
9 Dies (M3/M4/M5/M6/M7/M8/M10/
M12 & 1/8“)
1 Die stock M25
9 Taps (M3/M4/M5/M6/M7/M8/M10/
M12 & 1/8“)
1 Tap wrench (adjustable)
1 Instructions for use
Safety instructions
Keep All the sAfety AdviCe And in-
struCtionsin A sAfe plACe for future
referenCe!
J WArnInG! DAnGer
OF LOSS OF LIFe Or AccI-
Dent tO InFAntS AnD
cHILDren! Never leave children unsuper-
vised with the packaging materials. Packag-
ing materials present a suffocation hazard.
Children often underestimate danger. Always
keep the product out of reach of children.
J This device is not a toy. It does not belong in
the hands of children. Children do not appre-
ciate the dangers associated with the device.
J Check that the product is in perfect condi-
tion before each use. Damaged or loose
components may lead to injury.
Q
Use
AttentIOn! rISk OF InjUrY AnD/
Or DAMAGe tO PrOPertY! Do not
use the product or part of the product as an
attachment to electrical devices! The prod-
uct is intended to be used as a hand tool
only.
Q
cutting internal threads
(Figure A)
note: Use cutting oil to reduce the friction
between the workpiece and the tap 3 .
j Determine the required thread.
j Drill a core hole. This must be smaller in
diameter than the required thread (see table
below).
j Slightly widen the hole at the surface using
a countersink bit (max. 10 % of the thread
diameter at all sides). This will ease the work
of the tap 3 in turning the first threads.
j Mount the selected tap 3 in the tap
wrench 4 .
j Place the mounted tap 3 on the core hole.
Ensure that the tap 3 is absolutely perpen-
dicular.