Powerfix PLPRS A1 - Manual (Page 46)

43 PLPRS A1
GB
Battery insertion/ exchange
This wax melter requires 2 x 1.5 V batteries, type
AA/LR6/Mignon, for operation.
♦ Open the battery compartment on the
underside of the wax melter .
♦ Place the batteries into the battery compart-
ment , following the polarity details as
depicted in it.
♦ Close and secure the battery compartment.
Operating elements
Wax melter
Wax melter tip
On/Off
switch
Activation button
Battery compartment
Cleaning scraper
Scraper with planer function
Scraper with curvature
Sanding
sponge
Cleaning cloth
Handling and operation
In this chapter you will receive important infor-
mation for the handling and operation of the
appliance.
Switching the appliance on/off
♦ To switch the appliance on, place the On/
Off switch at the position "ON".
♦ Press and hold the activation button to
heat up the wax melter tip .
♦ To switch the appliance off , place the On/
Off switch at the position "OFF".
Application example
Preparation (Fig. A)
♦ Clean the damaged area with the spatula
and remove all loose parts. Press the edges
of the damaged area round.
Colour selection (Fig. B)
♦ Select the matching colour tone.
Ensure that several colour tones, from light to
dark, are always used. With real wood, it is
recommended to additionally work with trans-
parent (K), so as to achieve a sense of depth.
IB_102691_PLPRSA1_LB1.indb 43 10.07.14 10:36