Edimax Technology Edimax PS-3103P User Manual

Page 70

Advertising
background image

63

Lines should be indented with tabs.

Where hostname is the device name of a print server,

the ht=1 tag specifies the hardware type is Ethernet, the
ha= tag specifies the Ethernet address of a print server,
which is the Node ID located on the print server. The ha
tag must be preceded by the ht tag. The ip= tag should
correspond to the IP address you want to assign to the
print server.

For example, a print server with the following

configuration:

Node ID: 0000B4010101 (this implies Ethernet

address is 0000B4010101),

IP address: 203.66.191.12

The entry for this print server in the /etc/bootptab file

should be:

PS010101:\

:ht=1:\

:ha=0000B4010101:\

:ip=203.66.191.12:

Advertising