Powerfix Z28970A-02 - Manual (Page 56)

56 GB/MT
– incipient tears, breakages or considerable cases of or damage
from corrosion
– visibly permanent deformation of load-bearing parts.
J Repairs to the lashing straps may only be carried out if the
information regarding the manufacturer, material and maximum
permissible tensile load is clearly designated on the label. They
may only be carried out by the manufacturer or a person
specified by him. Following repair, the manufacturer or the
person designated by the manufacturer must ensure that the
maximum permissible tensile load of the lashing straps as
originally specified on the label is maintained.
J Never exceed the permissible tensile load of the lashing strap as
stated on the label. (see also “Technical data”).
J Choose the most suitable lashing strap in accordance with the
intended load that needs to be lashed down, the tensile load and
loading surface (see label).
CAUTION! DANGER OF ACCIDENT! When lashing using
additional fittings and lashing devices, make sure that they are
suitable for the lashing strap.
J Check that the vehicle parts you wish to strap the load to are
sturdy enough.
106714-Z29870A-02_IT_PT_Content.indd 56 11/28/2014 3:01:45 PM