MCZ Ego 2.0 AIR - Manual (Page 50)

MAN
21:11
FR
OFF
27
23:00
MAX
°C
MAN
21:11
FR
19
SF
°C
MAN
21:11
FR
19
SF
°C
48
13-REMOTE CONTROL MAX
Sleep function
The sleep mode allows to quickly set the time at which the product must switch off. This function is only available in MAN and AUTO mode.
It is set as follows: from the POWER setting (by pressing key D - see previous paragraph), press key D again to access the SLEEP mode
setting.
Via key C one can adjust the shutdown time in 10 minute intervals.
By confirming with D or E one goes back to the basic display, in which the sleep mode shutdown time is any case visible (figure 7).
To disable the SLEEP mode simply access the settings, decrease the time until the dashes appear and confirm.
NO AIR FUNCTION (SF)
The NO AIR function allows the stove to operate at the minimum power throughout the night, with no room ventilation. This function is
only available in AUTO and MAN mode(not in TIMER mode). Proceed as follows to set it:
from the VENTILATION setting (by pressing key D), press key D again and you will access theSLEEP setting mode.
From when the dashes “--“ are displayed, press the lower key C and the NO AIR function is activated (SF appears); by confirming with D
or E one goes back to the basic display in which SF and the moon remain visible.
Once the function is activated, the flame power goes to 1 and the ventilation switches off after about 5 minutes.
When this function is active, nothing happens when the C keys are pressed. To disable the NO AIR function, access the SLEEP setting, press
upper key C to make the dashes “--“ appear and confirm with keys D or E.
FIG.7