Recording a digital input signal – Edirol UA-1000 User Manual
Page 33
33
Basic connections and settings
Recording a digital input signal
fig.digital
●
Connections
Connect your digital audio device to either the coaxial digital input jack or the optical digital input jack, as
appropriate for your device.
●
Sampling frequency select switch
Set this to the same frequency as selected on your digital playback device and your recording software.
●
External clock switch
So that the UA-1000 will synchronize to the digital signal being input to the digital input jack, turn this on (lit).
●
Direct monitor soft control switch
Turn this on if you want to control the INPUT MONITOR from your software.
For details, refer to
●
Direct monitor volume
Adjust the volume appropriately.
ON (lit)
CD/MD/DAT player,
hard disk recorder, etc.
Connect to the OPTICAL/COAXIAL
IN jack of the appropriate type
Select the same sampling frequency as
your digital audio playback device
Select the same sampling
UA-1000_e.book 33 ページ ２００３年８月６日 水曜日 午前１１時５２分