MCZ Swing HYDRO - Manual (Page 22)

20
4-INSTALLATION AND ASSEMBLY
PREPARATION AND UNPACKING
The packaging consists of a recyclable cardboard box according to RESY standards, recyclable EPS foam inserts, wooden pallets. All
packaging materials can be reused for similar use or disposed of as urban solid waste, in accordance with current regulations.
After having removed the packaging make sure the product is intact.
Handle the product with suitable means in accordance with the applicable safety regulations in force. Do not turn the
packaging over and handle the ceramic parts with care.
The SWING stove is delivered inclusive of all its electrical and mechanical components and already tested at the factory.
Open the packaging, remove the two screws between the bracket and the stove and position the stove in the desired place, ensuring that
it is complies with the instructions above. As shown in figure 2, the product has a hook to make it easier to handle.
FIGURE 1 - REMOVING THE SCREWS ON THE PACKAGING
FIGURE 2 - HANDLING HOOK