Eureka 63 - Manual (Page 8)

8
Trouble Shooting Guide
Hand vac will not 1. Power cord not firmly 1. Plug unit in firmly.
operate. plugged into outlet. 2. Check fuse or breaker.
2. No power in wall outlet. Replace fuse/reset
breaker.
3. Thermostat 3. See page 4, Automatic
Motor Shut-Off.
Hand vac will not 1. Dust cup is full. 1. Empty dust cup.
pickup or suction 2. Unit clogged. 2. Turn unit off and unplug
power is weak. 3. Dust cup filter needs from wall outlet and
cleaning. check for object(s)
causing clog and
remove.
3. Clean or replace the
dust cup filter.
Dust escaping from 1. Dust cup filter needs 1. Empty dust cup and
hand vac. cleaning. clean filter.
2. Dust cup filter is not 2. Review dust cup filter
installed correctly. instructions.
3. Puncture/hole in dust cup 3. Replace dust cup filter.
filter.
Hand vac hose or 1. Hose clogged. 1. Remove hose and/or
brushes will not 2. Dust cup is full. brushes. Remove
pickup. obstruction from hose.
2. Empty and clean dust
cup and clean dust cup
filter.
PROBLEM POSSIBLE REASON POSSIBLE SOLUTION