Electro-Voice Sx600 - Manual (Page 3)

Electro-Voice ® Sx600 User Manual
Product Description
The Sx600 Series is a remarkably flexible indoor/outdoor speaker
system designed to produce high-fidelity high-level audio in distributed
applications such as stadiums, racetracks, amusement parks,
fairgrounds, etc. Utilizing a 65° x 65° high frequency horn and a unique
2-element vertical midbass array, Sx600 gives you the clarity of a direct
radiator with the high SPL and directivity of a properly designed horn
system, especially in the important vertical plane. While intended
primarily for vocal applications, the Sx600 accurately reproduces music if
heavy bass is not required.
Important Features
The Sx600 is available as either a conventional 4 ohm low impedance
system, the Sx600PI, or as a “constant voltage” system, the Sx600PIX.
The PIX version features a 100% duty cycle rated 600 watt full isolation
line transformer for operation with 70volt, 100volt, 140volt, or 200volt
distributed systems.
The Sx600 comes with an all-new Super Strong Arm Mount, called the
SuperSAM TM . This exclusive 2-part EV mounting system allows the
installer to pre-set the exact down angle on the ground, fasten the
separate mounting bracket by itself, and then mount the speaker to the
bracket quickly and easily with a single bolt, setting the pan angle
anywhere within a 180° arc in the process.
The three-layer stainless steel grill design is an acoustically transparent
yet effective barrier to both condensation and heavy rain. The light-
weight polypropylene enclosure has strategically placed internal
passages to conduct moisture that may accumulate internally out to the
side channels where it drains away.
1