Electro-Voice Sx600 - Manual (Page 7)

Electro-Voice ® Sx600 User Manual 5
Block Wall Mounting
Do not attempt to mount an Sx600 to a block or brick wall without
through-bolts and large, heavy steel backing plates on both sides of the
wall. On poured concrete walls use deep ½ inch diameter anchors that
cannot be pulled out once set. Use all 6 mounting holes.
SuperSAM TM
Bracket
1/2” Bolts
(6 Req’d)
Approved Straps
(4 Req’d)
Figure 2: Pole Mounting
Figure 3: Block Wall Mounting
SuperSAM TM
Bracket
1/2” Bolts
(6 Req’d)
Heavy Steel Backing Plates Block Wall
Block Wall
Pole Mounting
Follow the pole manufacturer’s recommendations when mounting to a
pole. On wooden poles, make sure there is no rot or other deterioration.
Through-bolts with backing plates are highly recommended. Lag bolts
should only be used in conjunction with straps.