Medal Sports 54810 - Manual (Page 9)

8
FIG. 9
FIG.9
18. Slide the Rods (#20-22) through the Rod Bushings (#48) on one Side Apron (#2) in the order as shown in
FIG.9 and 9A.
19. Place the Rubber Bumpers (#31) and Rod Washers (#30) onto the Rods in the order as shown in FIG.9B. And
then insert the rods through the Rod Bushings (#48) on the opposite Side Apron (#2). See FIG.9B.
20. Assemble Ivory Players, See FIG.9C:
a. Insert one Player Rivet (#29) into a Player Front (#23).
b. Place the Player on a Rod (#20, #21 or #22) so the Player Rivet passes through the hole on the Rod.
c. Place the Player Back (#24) on the Rod, making sure that the Player Rivet inserts into the Back.
d. Screw a Player Head (#25) onto the top of the Player Front and Back (#23 & #24).
e. Repeat the step above for the other Ivory Players.
21. Repeat the step 20 to assemble Red Players.
22. Place the Handles (#32) onto the Rods top which has a hole. And then
place the Rod End Caps (#33) onto the other side of the Rods.
32
33
The Hole
20
20
20
20
22
22
21
21
= RED
= IVORY
ORDER OF PLAYERS
(Overhead View)
48
48
48
49
30
30
30
30
31
31
20
FIG. 9B
FIG. 9C
FIG. 9A
31
IMPORTANT
Each team should be facing their
own goal box with their backs.
The players for each team must
be facing the same direction.
Note : Make Sure that the Rods are installed properly. The Rods
have a hole at their end where the Handles (#32) will go.
29
29
23
20
24
23
25
20
31