Medal Sports BL44123-14 User Manual
Page 11
A4
A8
A3
A7
A6
X 16
X 4
X 8
X 4
X 4
X 8
A1
A3
A4
A7 A4
4
8
A6
A8
A4
A3
A4
7
3
FIG.6
17. Turn over the pre-assembled Caster Frame (see FIG. 6), then attach it to the table surface using two Bolts (#A7),
four Washers (#A4) and two Nuts (#A3) per Table Surface.
See FIG. 6A.
Note: At least three adults are required to move the table halves for safety.
18. Attach the Linkage Tube - 7 (#7) to the Leg (#3) using one Bolt (#A6), two Washers (#A4), one Spacer (#A8)
and one Nut (#A3) per Linkage Tube - 7.
See FIG. 6B.
19.
Repeat the steps for another table half.
20. Attach Plastic Panel (#8) to the Caster Frame (#4) using four Screws (#A1) per frame.
See FIG. 6.
Now go back and tighten all connections.
Note:
Please leave approximately 10mm
distance between table centers.
A1
X 2
8
FIG. 6
FIG. 6B
FIG. 6A
www.themdsports.com
BL44123-14
10
(Continued on the next page.)