El-skyport modules, Troubleshooting, Ce statements – Elinchrom D-LITE 2 IT User Manual

Page 20: English

Advertising
background image

EL-Skyport Modules

EL-Skyport Universal SPEED (NEW) / Universal (previous version)
• Universal Receiver for all makes of Flash having a SYNC socket, conforming to Sync

norms!

EL-Skyport Transceiver RX

• This Transceiver is only for Elinchrom RX units. The module operates all RX

features with the EL-Skyport / ERS- software 3.0 and triggers the flash

EL-Skyport USB RX SPEED (NEW) / USB RX (previous version)

• To operate RX flash units via computer the USB module should be used together

with the EL-Skyport Transceiver RX and the ERS- software 3.0

Troubleshooting

Should an error occur, first check the following points:

Having this problem?

Check the following points:

No Flash unit can be triggered
with the Transmitter

Check if the Transmitter is switched ON

Check battery polarity

Check if the Receiver module is connected correctly to the unit

Check if the frequency selector switch is set to the same channel

Check if Transmitter is in the same trigger mode Speed or Standard.

Some units do not fire when trig-
gered with the Transmitter

Reduce distance to any “not working” unit.

Check if Transmitter is in the same trigger mode Speed / Standard.

TEST flash works, but the camera
will not trigger Flash unit

Check hot-shoe fitting

Limited Distance range

Reposition the unit

Increase the distance to walls and ceilings

CE Statements

This device has been tested and found to comply with the requirements set

up in the council directive on the approximation of the law of member states relating

to EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC and R&TTE Directive

99/5/EC

19

Universal Speed

& Universal

Transceiver RX

19353

USB RX Speed

& USB RX

English

Advertising
This manual is related to the following products: