Precision Digital PD6870 - Manual (Page 13)

PD6870 Loop-Powered Process Meter Instruction Manual
13
SETUP
Overview
Setup is done using four rotary control dials located on the front of the display
module that are accessed when the meter cover is removed. Setup is performed
using a 4-20 mA signal source and scaling the 4 and 20 mA readings using the
control dials.
Scaling Controls and Display
Control Description
LO 4 mA display adjust.
LO FINE 4 mA precision display adjust.
HI 20 mA display adjust.
HI FINE 20 mA precision display adjust.