Qlima H130 - Manual (Page 66)

66
3 Regularly clean the outside of the moisturiser with a slightly damp soft cloth.
4 Regularly clean the filter in the filler cap.
6. FAULTS
Fault Cause Solution
Indicator light fails to
light up when pressing
the control button.
Missing power supply. Restore the power supply.
Indicator light is on
and the device emana-
tes air but no mist.
The water reservoir is empty Fill the water reservoir
The water level sensor is not
being detected.
Position the bottom of the
water reservoir correctly so
that the sensor is detected.
Clean the level float.
Mist with unpleasant
smell
Water reservoir not clean
Open the filler cap and leave
it open for 12 hours. Clean
the tank and fill it with clean
water.
Mist level remains low
There are calcium deposits on
the ultrasonic element
Clean the ultrasonic element
and fill the water reservoir
with clean water.
Mist is leaking from
the water reservoir
The bottom of the water
reservoir is not connected
properly.
Position the bottom of the
water reservoir properly.
7. TECHNICAL SPECIFICATIONS
Model H 130
Mains 220-240/50Hz
Output voltage 24V
Electrical consumption 16 W
Capacity water container 1.6 l
Maximum evaporation capacity 130 ml
Dimensions mm (w x d x h )
180x180x460 long
evaporation nozzle
180x180x300 short
evaporation nozzle
Net weight 1.25 KG
4