Delete all keyfobs, Change keyfob buttons that controls the outputs – RISCO Group LightSYS User Manual
Page 37
User Functions and Settings
Page 37
LightSYS User Manual
4.
Press the keyfob key for 3 seconds.
5.
Repeat above steps for additional keyfobs. When finished press
to exit Erase
mode
Delete All keyfobs
1.
Follow steps 1-3 of the previous procedure (See Assign New Keyfob)
2.
Using the arrow keys, scroll to the Delete All Keyfobs option and press
.
3.
Use the
key to toggle to Y and press
.
Change keyfob buttons that controls the outputs
By default, button 3 (small round key) of the keyfob controls output 1 and button 4 (egg
shape) controls output 2. This can be changed for all the keyfobs that are already assigned
to the wireless receiver.
1.
Follow steps 1-3 of the previous procedure (See Assign New Keyfob)
2.
Using the arrow keys, scroll to the UO Buttons option and press
.
3.
Use the
key to toggle to Y and press
. This will replace button 3 to button 1
and button 4 to button 2.