RISCO Group LightSYS - Manual (Page 41)

User Functions and Settings
Page 41 LightSYS User Manual
Operation GM U In.
View
Trouble √ √ √
Should be used when the system has detected a problem, which is
evidenced by the rapid flashing of the power icon, as described
on page 9.
Alarm Memory √ √ √
Displays the five most recent alarm conditions stored by the
system.
Partition Status √ √ √
Displays the partitions' status, the troubles in the system and all
“not ready” zones.
Pressing on the key from the normal operation mode
displays the status of the partition to which the keypad is
assigned. Pressing the sequence [CODE] from the normal
operation mode displays the status of all the partitions assigned to the
user code.
Zone Status √ √ √
Allows the display of all system zones and their current status.
Service Info √ √ √
Allows the display of any previously entered service information
and the system version
IP Address √ - √
Use this option to view the IP address of the LightSYS. This option
is available only if IP module is defined in the system