Retrotec House and Duct Simulator - Manual

The House Simulator represents any building and lets
you adjust leakage from house-to-outdoors so you can
practice with a Blower Door. The inside of the tent
represents the “outdoors”,
while the room in which you
are standing represents the
inside of the building.
QG500 Page 1 of 4
Made in Everson, WA USA
rev-2014-11-17
The Duct Simulator represents a duct with adjustable
leakage that can be measured on its own, or connected
to a House Simulator to demonstrate the Duct Leakage
to Outdoors Test.
QuickGuide
House and Duct Simulator
The Simulators
Unpack the House Simulator case
The case contains:
● Aluminum simulator frame (4 pieces)
● Bolts and plastic washers
● Tent cloth
● Velcro leakage sliders (3)
● Fixing kit for aluminum simulator frame
You may also need:
● Cloth Door Panel with aluminum frame
● Fan (from Q46 or Q4E system)
● Digital Dual Channel Pressure Gauge
● Duct Simulator with 2 velcro leakage sliders
● DucTester
www.retrotec.com Sales & Support: (855)738-7683 International: (604)732-0142