Retrotec DucTester with DM-2 - Manual

QG130 Page 1 of 8
Made in Everson, WA USA
rev-2014-08-05
QuickGuide
DU200 DucTester
Flex Duct
DM-2 gauge
(Batteries included)
Umbilical
Flange
Low-Range Ring
Mid-Range Ring
DucTester
Grill Mask
QuickGuides
Battery Charger
Tubing
Accessory Kit
Unpack, connect DM-2 gauge
Check boxes for each step.
□
Remove everything from the case.
□
Install 4 NiMH AA batteries.*
□
Plug in the battery charger.
□
Press [On], then [Exit], to display
the battery indicator.
□
Charge for 18 hrs.
□
Connect yellow, green and blue tube
to gauge.
□
Slide gauge into the clear sleeve and
velcro Umbilical to case.
Gauge remains connected
like this for all tests.
* If changing to non-rechargeable batteries, disable
charging in [Setup] menu. For steps see:
Quick Guide DM-2 mark II Digital Gauge, page 1
www.retrotec.com Sales & Support: (855)738-7683 International: (604)732-0142