RIGOL DS1000D - Manual (Page 6)

RIGOL
Installation Guide for RM-DS-1 Rackmount Kit 5
Installation Instructions
This section will introduce you how to mount the DS1000 series Oscilloscope into a standard 19-inch
machine cabinet.
Installation Tools
Table 2 Installation Tools List
NO. Name Description
1 Phillips screwdriver PH2 Phillips screwdriver
CAUTION
Only authorized personnel can perform the installation, improper operation may cause
damage to the instrument or incorrect installation.
Installation Procedures
1. Install the left and right plate: aim the detents of both right and left plate at the openings on
support board and insert selectively, then fix them using four M4 bolts.
Figure 4: Installation of Left and Right Plate
!