RIGOL DS1000D - Manual (Page 9)

RIGOL
Installation Guide for RM-DS-1 Rackmount Kit 8
Notice
1. The rack holds a height of 4U, and the holes those in compliance with the arrow direction are the
mounting holes for rack.
Figure 9: Holes for rack
2. The rack has a power cord that was connected with the power input terminal and the power
source terminal in series. A ship type switch is used to turn ON or OFF the instrument once the
power switch above the instrument has been pressed down.
Figure 10: Power Cord Connection of Rack
Power input
Ship type switch
Power source