Rose Electronics Xtensys - Manual (Page 9)

OPERATION
Xtensys Video Extender
Installation and Operations Manual
5
Operation
Operation of your system is no different than having monitor connected
directly to a PC. The only difference is they can be up to 1,000 feet away.
You can operate your system normally, programs can be executed,
maintenance can be performed, and any operation normally performed can
be done with no degradation in video quality and performance.
The Computer Select menu allows you to perform alternative switching from
the local Xtensys KVM station. You can switch any Xtensys CPU port to
any Xtensys KVM port.
To display the Computer select menu, from the local KVM station on the
Xtensys unit, press and release the left Ctrl key then the Esc key.
The below Computer select menu will display.
On the Computer Select Menu in the top row of the lower menu, there is the
label KVM Local. This is the KVM station that will switch to a selected
computer. To perform this alternative switching:
1. Display the computer select menu (Left Ctrl key + ESC key)
2. Press the tab key to select the KVM port to switch the video to
3. Press the up / down arrow keys to select the Computer to switch to
the selected KVM station’s remote monitor.
4. Press “V” to switch the video from the selected computer to the
selected KVM port.