Epson B 310N - Manual (Page 105)

Using the Control Panel 105
Printer Status Menu
This menu allows you to check the current printer status.
Version
You can check the firmware version.
Maintenance box
You can get a rough estimate of the remaining capacity of the maintenance box.
Maintenance Menu
This menu allows you to make settings related to maintenance.
Head alignment
You can print a head alignment test pattern. From the printing results, you can adjust the
head alignment.
Cleaning
You can clean the print head. You can also print a nozzle check pattern before cleaning.
Auto Cleaning
This printer automatically checks the print head nozzles without printing a pattern and
cleans the nozzles if they are clogged. Some ink is consumed from all cartridges while
checking the print head nozzles.
You can turn this function Off or On.
Cleaning sheet
You can clean up the rollers inside the printer.
Contrast adj.
You can adjust the contrast of the LCD screen. Press the u Up or d Down button to adjust
contrast.
Low Speed Mode
This function may prevent the print head nozzles from becoming clogged, and will print out
more quietly.