Epson B 310N - Manual (Page 106)

Using the Control Panel 106
You can turn this function Off or On.
Network Setting Menu
This menu allows you to make network settings.
Network setup
You can select the method to configure the network settings.
When Auto is selected, the printer obtains the IP address, Subnet mask and Default
gateway automatically. When Panel is selected, you can specify the IP address, Subnet
mask, and Default gateway settings using the control panel. When Init N/W set is selected,
you can revert the network settings of the printer to the factory default value.
IP address, Subnet mask, Default gateway
You can set the IP address, Subnet Mask, and Default Gateway to the printer. To change
the parameter, press the
l Left or r Right button to move cursor and the u Up or d Down
button to change number.
Bonjour
You can set the Bonjour settings of the printer.
Password Menu
This menu allows you to make settings related to the LCD panel lock.
Password Setting
You can set the password for the LCD panel lock by entering the current password once
and the new password twice. To enter the password, see “Entering the Password” on page
109
Note:
❏
The password is set to "" (none) as the factory default.
Item Parameter
Network setup Auto -
Panel IP address 000.000.000.000–255.255.255.255
Subnet mask 000.000.000.000–255.255.255.255
Default gateway 000.000.000.000–255.255.255.255
Init N/W set -