Epson B 310N - Manual (Page 107)

Using the Control Panel 107
❏
The password is limited to 8 characters.
❏
Alphanumeric characters are available for the password.
❏
If you forget the password, contact Epson support.
& See “Epson Technical Support” on page 164.
Lock Setting
You can lock the LCD panel to make it childproof, or to prevent unexpected changes made
by using the LCD panel.
When Ready apears after you set this function On, you need to enter the password when
you press the r Right button to enter the Menu mode .
Status and Error Messages
This section describes the meaning of messages displayed on the LCD screen.
The table below describes the status messages.
The table below contains error messages, a brief description of each message and
suggestions for correcting the problem.
Message Description
Cancel The print job is canceled.
Charging ink The printer is charging the ink.
Cleaning The printer is cleaning the print head.
Please wait The printer is starting.
The printer is initializing the settings.
Printing The printer is processing data.
Ready The printer is ready to print.
Power save The printer is in the power save mode.
Power off The printer is shutting down.
Message Problem Solutions
Service call see guide Service call error occurs. Turn off the printer and then back
on. If the error does not clear,
contact Epson.
& See “Where To Get Help” on
page 164.