TA Triumph-Adler P-C3560DN User Manual
Page 196
10-11
Troubleshooting > Troubleshooting
Printouts are curled.
Is the paper damp?
Replace the paper with new paper.
Cannot print.
Is the machine plugged in?
Plug the power cord into an AC outlet.
―
Is the machine powered on?
Turn on the power switch.
Are the USB cable and network cable
connected?
Connect the correct USB cable and
network cable securely.
Cannot print with USB
memory.
USB memory not
recognized.
Is the USB host blocked?
Select [Unblock] in the USB host
settings.
―
Check that the USB memory is securely
plugged into the machine.
―
Dirt on the top edge or back
of the paper.
Is the interior of the machine dirty?
Clean the interior of the machine.
Part of the image is
periodically faint or shows
white lines.
―
Open and then close the rear cover.
―
Select the [Menu] key > [Adjust/Maint.]
> [Service Setting] > [MC] and
decrease the adjustment value.
Decrease the adjustment value 1 level
at a time from the current value. If there
is no improvement after the value is
decreased by 1 level, decrease by 1
level again. If there is still no
improvement, return the setting to the
original value.
―
Skewed-color printout.
―
Run [ColorCalibration].
―
Run [Color Regist.].
Colors appear different than
you anticipated.
When printing from a computer
Adjust the color using the printer driver.
―
The previous image remains
and lightly printed.
―
Select the [Menu] key > [Adjust/Maint.]
> [Service Setting] > [MC] and increase
the adjustment value. Increase the
adjustment value 1 level at a time from
the current value. If there is no
improvement after the value is
increased by 1 level, increase by 1 level
again. If there is still no improvement,
return the setting to the original value.
―
Symptom
Checkpoints
Corrective Actions
Reference
Page