TA Triumph-Adler P-C3560DN - Manual (Page 199)

10-14
Troubleshooting > Troubleshooting
E
H
I
Cannot execute this job.
Restricted by
Authentication settings. ― This job is canceled because it is
restricted by Authentication
settings. Select [OK]. ―
Check cassette #. ― Open and then close the indicated
cassette. ―
Close rear cover #. Is there any cover which is open? Close the cover indicated on the
screen. ―
Close the waste toner
cover.
Close top cover.
Color toner is empty.
Cannot print this
document. ― Replace the toner container using a
new toner kit for the particular color. page 10-3
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Err. Clear (page 8-16)
Message Checkpoints Corrective Actions
Reference
Page
Error occurred.
Turn the power switch
off and on. ― System error has occurred. Turn the
main power switch OFF and then
ON. ―
Message Checkpoints Corrective Actions
Reference
Page
High temperature.
Adjust room temp. — Adjust the temperature and the
humidity of your room. ―
Message Checkpoints Corrective Actions
Reference
Page
Incorrect account ID.
Press [OK].
*1
― The account ID was incorrect when
processing the job externally. The
job is canceled. Select [OK]. page 9-16
Incorrect ID. ― The administrator ID entered to
open the Security function or Job
Accounting menu is not correct.
Enter the correct administrator ID. ―
― The user ID entered for a private job
is not correct. Check the user ID
that you specified on the printer
driver. page 4-10
page 4-12
Message Checkpoints Corrective Actions
Reference
Page