Subaru Robin SGX3500 - Manual (Page 34)

- 32 -
7-4 ASSEMBLY PROCEDURES
7-4-1 ENGINE and FRAME
(1) Attach the mount rubbers to the frame. Insert the setting tongue of mount rubber into the hole
on the frame and tighten the nut from the bottom of the frame.
M8 flange nut . . . 4 pcs.
NOTE : The mount rubbers are selected to reduce vibration most effectively by model.
Be sure to use the correct mount rubber for your generator.
Although mount rubbers have the same appearance, their characteristics are different.
(2) Install the engine into the frame from the side of it.
Tighten the nuts over the mount rubber bolts to fix.
SGX3 5 0 0
SGX5 0 0 0 / 7 5 0 0