Figure 5. store/recall window, Figure 6. trigger window, Figure 7. calibration window (half rack) – KEPCO BHK-MG VISA Driver Manual (Both Full and 1/2 Rack) User Manual
Page 9: Figure 8. calibration window (full rack)
BHK-MG-VISA 010906
9
ing power supply settings. Voltage Setpoint, Current Setpoint, and Output On/Off status. Whenever the
same location is selected, the Recall button restores the saved settings.
FIGURE 5. STORE/RECALL WINDOW
2.2.6 The Trigger button opens the Trigger window (Figure 6) which allows setting of trigger voltage and
current values. Clicking the Trigger button within the Trigger window causes the power supply output to be
programmed to the settings stored in the Trigger Voltage and Trigger Current displays. .
FIGURE 6. TRIGGER WINDOW
2.2.7 The Calibrate button The Calibrate button opens the Calibration Window (Figure 7), and is used to
recalibrate the unit (see Section 4 of the BHK Technical Manual).
FIGURE 7. CALIBRATION WINDOW (HALF RACK) FIGURE 8. CALIBRATION WINDOW (FULL RACK)