KEPCO RA 58 - Manual

©1999, KEPCO, INC 1
Data subject to change without notice 228-1356
I N S T R U C T I O N S H E E T
RA 58
KEPCO
KEPCO, INC. !"! 131-38 SANFORD AVENUE !" FLUSHING, NY. 11352 U.S.A.!!" TEL (718) 461-7000!!"! FAX (718) 767-1102!!
http://www.kepcopower.com "! email: [email protected]
An ISO 9001 Company.
SERIES
MODEL RA 58, 58-23E, 58-24E
RACK ADAPTER
DESCRIPTION (Refer to FIG. 1)
The Kepco Model RA 58 Rack Adapter is designed for the installation of Kepco HSM and HSP series of Power Supplies into
a standard 19-inch (482.6mm) rack. Model RA 58-23E accommodates a 23-inch rack and Model RA 58-24E accommodates
a 24-inch rack (the mounting brackets for these models must be attached to the chassis by the user with the four mounting
screws provided, P/N 101-0396, 10-32 x 0.5 in.lg., FLPO). Optional ear brackets to modify any of the three models to
accommodate one of the three standard size racks are available, consult Table 1. Each Rack Adapter can accommodate a
maximum of three power supplies. The Rack Adapter occupies 5.2 inches (132.5mm) of vertical space in the standard 19-
inch (482.6mm) equipment rack and is 16.4-inches (416.6mm) deep. HSP power supplies installed in the Rack Adapter
require a Kepco Fixed Installation kit (P/N 219-0240 or 219-0249 [optional]); consult associated HSP Power Supply Instruc-
tion Manual.
The Rack Adapter is drilled to accept chassis slides. It is equipped with four metal feet attachments, Rack Adapter handles
and mounting ears. The Rack Adapter can use 18 inch (457.2mm) Jonathan Model 110-QD-18 chassis slides. Optional ear
brackets enable two additional Rack Adapter set-backs (see Table 1 and Figure 2). The Rack Adapter can be equipped with
optional 1/3 and 2/3 blank front filler panels (Kepco model RFP 60-1 and RFP 60-2, respectively) if the full complement of
three power supplies is not utilized.
Mechanical dimensions, material and finish of the Kepco Model RA 58 Rack Adapter are provided in Figure 2.
FIGURE 1. . RA 58 RACK ADAPTER ASSEMBLY
TABLE 1. ACCESSORIES
ACCESSORY PART NUMBER USE
MOUNTING
BRACKETS
(NOTCHED)
128-1714 Used to mount RA 58 in 19-inch rack using “set back” position (see Figure 2).
128-1736 Used to mount RA 58 in 23-inch rack using “set back” position (see Figure 2).
128-1827 Used to mount RA 58 in 24-inch rack for both flush (standard) or “set back” positions (see Figure 2).
MOUNTING
BRACKETS
(UNNOTCHED)
128-1631 Standard mounting ear for 19-inch rack applications.
128-1776
Used for standard (flush) mounting of RA 58 in 23-inch rack (see Figure 2).
SCREW 101-0159 Used for fixed mounting of HSM Power Supply, 4 required per power supply (#6-20, 0.625 in. long).
SCREW 101-0396 Used to attach mounting brackets to chassis (#10-32 x 0.5 in.lg., FLPO).