Elo TouchSystems Elo Entuitive 3000 Series 1729L - Manual (Page 11)

2.Omni-Directional scanner (Elo P/N E787026) specifications.
a. Ability to generate omni-directional scanning pattern
b. Maximum performance
c. 2-D scanning ability (PDF417, MicroPDF)
d. USB powered
e. Easy communication between host and scanner
f. Visible laser diode operating at 650nm
g. 600+ scans/sec
h. RoHS-compliant
3.USB-SSI converter board (Elo P/N E580321) specifications
a. Ability to convert from serial interface to USB interface and vice versa.
b. Compact size
c. Input Voltage: 5V
d. Buzzer
Six Port USB Hub
The Hub provides 4 internal USB ports that can be shared between the MSR, the fin-
gerprint reader, the barcode scanner, the touchscreen, and the customer display. The hub
also supplies two USB ports to the outside of the back of the 1729L for external use. The
hub is only used by the USB version of the 1729L. The hub meets the following
specifications:
1) Full compliance with USB specification 1.0, 1.1 and HID Class Definition
Rev 1.0.
2) Shall be self powered
3) Should provide 2 external and 4 internal downstream ports with individual
port over current detection, protection and recovery.
4) Support both Open Host Controller Interface (OHCI) and Universal Host
Controller Interface (UHCI).
5) Support Suspend and Resume operation.
6) Support bus fault detection and recovery.
External Power Supply
The 1729L shall be powered by a universal AC power source or 12 VDC from external
power source. The power supply shall provide the following capability:
1) AC power: Input voltage 90 to 264 vac
2) Input frequency 47 to 63hz
3) DC power: Input voltage 12 vdc
4) Input line and load regulation +/-5%
1-5