Elo TouchSystems Elo Entuitive 3000 Series 1729L - Manual (Page 28)

Barcode Scanner
Driver Installation:
1. Insert your Elo TouchTools CD.
2. On the CD, browse to Touch Monitor Peripherals\Barcode Scanner Startup\Drivers.
3. Double-click on USB7210.msi and follow the prompts given by the setup file.
4. Once you have finished installing the above: Right click on My Computer and click
on Properties. Click on the Hardware tab and then click Device Manager.
5. Double click on USB7210 Converter Module, which should be located in the Other
Devices section. Next click on Reinstall Driver.
6. Now your Windows operating system should guide you through the rest of the instal
lation process. If any files are requested, please provide the following pathname in
your Elo TouchTools CD: Touch Monitor Peripherals\Barcode Scanner
Startup\Drivers.
Test Applications:
1. Insert your Elo TouchTools CD.
2. On the CD, browse to Touch Monitor Peripherals\Barcode Scanner Startup\Test
Applications.
3. Double click on Scanner Test Application Readme. This document will explain how
to test your scanner for basic functionality.
Hall Effect Switch:
The scanner module also adds a Hall Effect Switch (HE Switch) that enables the unit to
automatically set the Trigger mode of the Scan Engine depending on the location of
anexternal magnet (included in scanner cradle).
The output of the HE Switch switches low (turns ON) when a magnetic field (south
polarity) perpendicular to the Hall sensor exceeds the operate point threshold, BOP
(typically 100 G magnetic field). When the magnetic field is reduced below the release
point, BRP, (typically 45 G magnetic field) the HE Switch output goes high (turns OFF).
The Hall Effect Switch goes to the USB Controller’s DSR input. As the HE Switchopens
or closes, it causes the USB Controller to initiate a USB Interrupt message to thehost.
When the Host Application software detects the DSR input active LOW via theUSB
Interrupt and a CDC message (HE Switch is ON), it sends a ‘Continuous Trigger’SSI
command.
2-22 Elo Touchmonitor User Guide