Epson ELPIU03 - Manual (Page 3)

Installation Precautions
Warning
• Attachment to the projector should be performed by qualified technicians using only approved mounting equipment.
• Follow the instructions in the Quick Setup Guide when installing the Interactive Unit. Incomplete or incorrect installation could cause the product to fall and cause
personal injury or property damage.
• If you apply adhesives to prevent the screws from loosening, or if you use lubricants or oils on the wall plate, the housing may crack and cause the product or the
projector to fall, resulting in personal injury or property damage.
• Confirm on a regular basis that the screws have not become loose. If you find any loose screws, tighten them firmly. Otherwise, the product or wall plate may fall and
cause personal injury or property damage.
• Handle the USB cable carefully to avoid fire or electric shock. Observe the following precautions when handling:
- Do not handle the cable with wet hands.
- Do not use a cable that is damaged or modified.
- Do not pull the cable with too much force when routing it or connecting it to a computer.
• Do not apply excessive force to this product when adjusting the projector. Otherwise, the product may cause personal injury.
Caution
Do not install the product in a location where there is excessive humidity or dust, near cooking or heating appliances, or in a location exposed to smoke or steam. Fire or
electric shock may result.