Epson ELPLP29 - Manual (Page 40)

39
Advanced Operation > Configuration Menus
Display Message When set to "OFF", messages such as "No signal", and the name of the selected input source or colour
mode will no longer be displayed. Warning messages such as "Replace the lamp" will continue to be
displayed.
Background Color Sets the background colour to black or blue.
Startup Screen Sets whether or not the "EPSON" logo will be displayed during projector startup.
Video Signal Selects the colour system of the video signal being input.
(Changes in signal format will only be noticeable when the input source is Video/S-Video.)
Volume Adjusts the volume setting
Sleep Mode Sets the energy saving option for when no signal is being input.
• When a Sleep Mode interval has been set, the projector will enter Sleep Mode when no operation has
been carried out for the set time (5, 10 and 30 minutes). Projection will shut down and the projector enters
a standby state after cooling down. (The power indicator lights orange).
• Projection starts again when the [Power] button is pressed on the projector's contol panel or the remote
control.
Language Selects the language in which on-screen messages are displayed.
• Press the [e] button and select the desired language from the list which is displayed.
Reset Resets all the adjustment values within the "Setting" menu (except for "Language") to their default settings.
• Press the [e] button and select "Yes" on the confirmation screen which is displayed.
Sub menu Function