Epson ELPLP29 - Manual (Page 62)

61
Optional Accessories
The following optional accessories are available for purchase if required. This list of optional accessories is current as of August 2004. Details of
accessories are subject to change without notice.
Part number Part name Use
ELPLP29 Spare lamp Use as a replacement for spent lamps.
ELPAF03 Air filter (5 included) Use as a replacement for spent air filters.
ELPST11 Remote controller Identical to the remote control provided with the projector.
ELPST09 Presentation remote control kit Optional Presentation remote control and remote control
receiver set.
ELPSC06 50" Portable screen A compact screen which can be carried easily. (4:3 aspect
ratio)
ELPSC07 60" screen A portable roll type screen. (4:3 aspect ratio)
ELPSC08 80" screen
ELPSC10 100" screen
ELPKC02 VGA-HD15 PC cable (1.8m/6ft.)
(for mini D-Sub 15pin/mini D-Sub 15pin) Use to connect the projector to a computer.
ELPKC09 VGA-HD15 PC cable (3m/9.8ft.)
(for mini D-Sub 15pin/mini D-Sub 15pin) Use these extension cables if the provided computer cable
is too short.
ELPKC10 VGA-HD15 PC cable (20m/65.6ft.)
(for mini D-Sub 15pin/mini D-Sub 15pin)
ELPKC11 VGA-HD15 PC cable (1.8m/6ft.)
(for mini D-Sub 15 pin/5BNC) Use when connecting the projector to a computer with a
5BNC port.
ELPKC19 Component video cable (3m/9.8ft.)
(for mini D-Sub 15pin/RCA
× 3 (male))
Use to connect the projector to a component video source.
ELPKC27 Component video cable (0.35m/1.15ft.)
(for mini D-Sub 15pin/RCA
× 3 (female))
Use to connect the projector to a commercially available
component video cable (RCAx3, male).