Electrolux 241940002 - Manual (Page 8)

8 Installation
To adjust the door stop:
Door stop is adjustable between 85 to 145 degrees.
1 Open door to provide access to set screw.
2 Loosen set screw.
3 Adjust door to desired location.
4 Rotate door stop until it makes contact with the
lower hinge.
5 Re-tighten set screw.
Loosen/Remove Set Screw
6 Ensure door stops in desired location before
resuming normal use.
To level the doors using the adjustable lower hinge
(select models):
1 Remove all food items from door bins on door
being adjusted.
2 Open doors to 90 degrees.
3 Loosen or remove set screw.
Adjusting Door
Re-tighten Set Screw
NOTE
View shown is looking up at the bottom of the
refrigerator door.
Adjustable Door Stop