Edirol V-44SW E1 - Manual (Page 35)

35
Setting the Input and Output
The V-44SW’s input and output formats are selectable; you
can specify the NTSC format used in Japan and the United
States or the PAL format used in Europe. Switch to the format
suited to your needs.
● Switching the input and output formats also switches the frame
rate of the output format of component (p. 31).
With NTSC format: Frame rate of “60” frames per second
With PAL format: Frame rate of “50” frames per second
1 Press the [MENU] button to display the Main menu.
2 Select “8. System” and select “1: System Frame Rate”
from the sub-menu.
3 Set each parameter to “60-NTSC” or “50-PAL.”
60-NTSC: NTSC format
50-PAL: PAL format
You can display a test pattern (color bars), useful and
convenient in adjusting the image quality of the display.
1 Press the [MENU] button to display the Main menu.
2 Select “1. Output” and select “14: Test Pattern Select”
from the sub-menu.
3 Select the test pattern to be displayed.
The test pattern (color bars) is output.
Selecting NTSC or PAL Format Displaying a Test Pattern
Value Displayed
Off (No output)
75% Color Bar
100% Color Bar
V-44SW_e.book 35 ページ ２００６年１０月２３日 月曜日 午後３時２５分